Step 1: Turn off the Wysiwash Sanitizer by pressing the Trigger Release Button (Part J). Do not switch from Sanitizing to Freshwater Mode while the Wysiwash solution is being emitted.
Step 2: Detach the Wysiwash Sanitizer from the Pro Handle with the Adjustable Nozzle (Part A) pointing down.
CAUTION: The solution inside the Wysiwash Sanitizer is concentrated and can stain. Take care to avoid contact with skin and clothing.
Step 3: Place the Wysiwash Sanitizer over a safe draining area. Tilt the adjustable nozzle (Part A) upwards so that the liquid can drain through Nozzle-End Female Quick Connector (Part G).
Step 4: Attach the Detachable Pro Nozzle (Part N) to use fresh water.
Best for:
When you want increased pressure over your regular hose and to use fresh water only.
Switching to Freshwater Mode (Option B)
If you do not need additional pressure or you are not ready to drain the Wysiwash Sanitizer Pro yet, you can remove the Wysiwash Sanitizer Pro from the hose.
Step 1: Turn hose off.
Step 2: Pull back on the Hose-End Female Quick Connector (Part L) to detach the Pro Handle from the hose.
Step 3: Turn hose on. There is no water stop in the quick connector, so water will flow freely.
Best for:
When you do not need additional pressure. (Ex. Watering plants.)
When you are not ready to drain yet, and want to switch back to sanitizing quickly. (For example: Rinsing off a piece of metal equipment before continuing to sanitize.)
