Quick Start: Attaching Wysiwash

Step 1: Unscrew the Caplet Container from the Hydro Body (top of the Sanitizer-V).

Step 2: Place caplet inside the Caplet Container. Do not remove the plastic jacket. If the plastic jacket has been removed or damaged, dispose of the caplet.

Note: We recommend you wear gloves when handling the Jacketed Caplets. While the Wysiwash solution does not irritate skin, in its solid, concentrated form it can irritate eyes and skin.

Step 3: Secure the Hydro Body (top piece) of the Sanitizer-V to the Caplet Container. Tighten until snug, but do not over-tighten.

Step 4: Thread the Female Quick Connector onto your garden hose.

Step 5: There is a "neck" on the opposing end of the Female Quick Connector that will slide back toward the hose end. Pull the neck back and insert the Sanitizer-V (male end) into the Female Quick Connector. Then release the neck. After, press the two parts gently together to make sure the two parts are securely connected.